Doowon ARUM 5X-450
5X-450 for machining various prostheses at reasonable price
With the use of an open C-type cartridge, you can precisely mill the Labial side (buccal side) and an Under-cut zone that requires additional machining. With the amazing power of the best-in-class spindle AC 1.28 kW, you can mill various shapes and materials
such as Denture, Zirconium, CAD Block, and Titanium milled Bar. etc. (Except for Ni-Cr / Co-Cr Disk)
Machining with the removal of connector
You can mount 5 Pre-milled Blanks and produce customized abutment with the removal of the connector using AT Holder and Attachment. The removal of the connector increases the degree of bonding with the upper prosthesis and reduces the workers’ post-stage works, improving work efficiency.
Differentiated round bar machining
You can mill the Cuff side (Gingival area), the Occlusal side, the Connector less, and Retention Groove in simple Top & Bottom Side milling using AT cartridge. Anyone can easily produce high-quality customized abutment.
Dedicated template for ARUM,
Outcome of our extensive know-how
Based on our extensive know-how accumulated over many years and
various milling restoration around the world, we provide the optimal
dedicated ARUM template for any case of Implant Bar and Screw-retain Bridge. This is ARUM’s unique asset that cannot be provided anywhere else.
Maintenance of the best use conditions
With Auto-Calibration Function, users can maintain the best condition of machine anytime. In particular, with Auto-Calibration function
by the location of Pre-milled blank, you can produce high accuracy customized abutment.